Moisture Detection and Mapping in Agness, OR

Moisture Detection and Mapping in Agness, OR

Drying without measuring is guessing with expensive equipment.

Agness, OR Water Extraction maps moisture on every Agness, OR job before setting a single air mover. Thermal imaging shows where temperature anomalies suggest water, then penetrating and non-penetrating meters confirm actual moisture content in the material. The camera alone is not proof, because insulation gaps and drafts produce similar patterns.

That map does two things. It tells us where equipment needs to go, which is frequently well beyond the visible wet area since water travels along framing and under flooring. And it establishes the baseline against which drying progress gets measured.

Readings are taken at the same locations at each visit and logged with dates. Wood framing above roughly 16 percent supports mold growth. Drywall should read near zero on a non-penetrating meter. Those numbers, taken at marked points, are what tell you the job is actually finished.

That log is also what your adjuster wants.

Call Agness, OR Water Extraction at (833) 846-0654.